Spin State Disproportionation in Insulating Ferromagnetic LaCoO3 Epitaxial Thin Films.

The origin of insulating ferromagnetism in epitaxial LaCoO3 films under tensile strain remains elusive despite extensive research efforts are devoted. Surprisingly, the spin state of its Co ions, the main parameter of its ferromagnetism, is still to be determined. Here, the spin state in epitaxial LaCoO3 thin films is systematically investigated to clarify the mechanism of strain-induced ferromagnetism using element-specific X-ray absorption spectroscopy and dichroism. Combining with the configuration interaction cluster calculations, it is unambiguously demonstrated that Co3+ in LaCoO3 films under compressive strain (on LaAlO3 substrate) is practically a low-spin state, whereas Co3+ in LaCoO3 films under tensile strain (on SrTiO3 substrate) have mixed high-spin and low-spin states with a ratio close to 1:3. From the identification of this spin state ratio, it is inferred that the dark strips observed by high-resolution scanning transmission electron microscopy indicate the position of Co3+ high-spin state, i.e., an observation of a spin state disproportionation in tensile-strained LaCoO3 films. This consequently explains the nature of ferromagnetism in LaCoO3 films. The study highlights the importance of spin state degrees of freedom, along with thin-film strain engineering, in creating new physical properties that do not exist in bulk materials.

Ultrabroadband plasmon driving selective photoreforming of methanol under ambient conditions.

Liquid methanol has the potential to be the hydrogen energy carrier and storage medium for the future green economy. However, there are still many challenges before zero-emission, affordable molecular H2 can be extracted from methanol with high performance. Here, we present noble-metal-free Cu-WC/W plasmonic nanohybrids which exhibit unsurpassed solar H2 extraction efficiency from pure methanol of 2,176.7 µmol g-1 h-1 at room temperature and normal pressure. Macro-to-micro experiments and simulations unveil that local reaction microenvironments are generated by the coperturbation of WC/W's lattice strain and infrared-plasmonic electric field. It enables spontaneous but selective zero-emission reaction pathways. Such microenvironments are found to be highly cooperative with solar-broadband-plasmon-excited charge carriers flowing from Cu to WC surfaces for efficient stable CH3OH plasmonic reforming with C3-dominated liquid products and 100% selective gaseous H2. Such high efficiency, without any COx emission, can be sustained for over a thousand-hour operation without obvious degradation.

Orbital-Hybridization-Driven Charge Density Wave Transition in CsV3 Sb5 Kagome Superconductor.

Owing to its inherent non-trivial geometry, the unique structural motif of the recently discovered kagome topological superconductor AV3 Sb5 (A = K, Rb, Cs) is an ideal host of diverse topologically non-trivial phenomena, including giant anomalous Hall conductivity, topological charge order, charge density wave (CDW), and unconventional superconductivity. Despite possessing a normal-state CDW order in the form of topological chiral charge order and diverse superconducting gaps structures, it remains unclear how fundamental atomic-level properties and many-body effects including Fermi surface nesting, electron-phonon coupling, and orbital hybridization contribute to these symmetry-breaking phenomena. Here, the direct participation of the V3d-Sb5p orbital hybridization in mediating the CDW phase transition in CsV3 Sb5 is reported. The combination of temperature-dependent X-ray absorption and first-principles studies clearly indicates the inverse Star-of-David structure as the preferred reconstruction in the low-temperature CDW phase. The results highlight the critical role that Sb orbitals play and establish orbital hybridization as the direct mediator of the CDW states and structural transition dynamics in kagome unconventional superconductors. This is a significant step toward the fundamental understanding and control of the emerging correlated phases from the kagome lattice through the orbital interactions and provides promising approaches to novel regimes in unconventional orders and topology.

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO2.

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. However, interfacial mixing can readily occur and significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here, we show a two-step sequence involving the growth of an epitaxial LiCoO2 cathode layer followed by the deposition of a binary transition metal oxide. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li2WO4 and anode material Li4Ti5O12 occurs as WO3 and TiO2 nucleate and react with Li ions from the underlying cathode. We demonstrate that this lithiation-assisted epitaxy approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

Superconductivity in infinite-layer nickelate La1-xCaxNiO2 thin films.

We report the observation of superconductivity in infinite-layer Ca-doped LaNiO2 (La1-xCaxNiO2) thin films and construct their phase diagram. Unlike the metal-insulator transition in Nd- and Pr-based nickelates, the undoped and underdoped La1-xCaxNiO2 thin films are entirely insulating from 300 K down to 2 K. A superconducting dome is observed at 0.15 < x < 0.3 with weakly insulating behavior at the overdoped regime. Moreover, the sign of the Hall coefficient RH changes at low temperature for samples with a higher doping level. However, distinct from the Nd- and Pr-based nickelates, the RH-sign-change temperature remains at around 35 K as the doping increases, which begs further theoretical and experimental investigation to reveal the role of the 4f orbital to the (multi)band nature of the superconducting nickelates. Our results also emphasize a notable role of lattice correlation on the multiband structures of the infinite-layer nickelates.

Room-Temperature Ferromagnetism at an Oxide-Nitride Interface.

Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of the Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via heteroanions has not been explored and the associated quantum states are unknown. Here, we report the successful epitaxial synthesis and characterization of chromium oxide (Cr_{2}O_{3})-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr^{3+} ions via anion-hybridization across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.

Realizing Two-Dimensional Supramolecular Arrays of a Spin Molecule via Halogen Bonding.

Well-ordered spin arrays are desirable for next-generation molecule-based magnetic devices, yet their synthetic method remains a challenging task. Herein, we demonstrate the realization of two-dimensional supramolecular spin arrays on surfaces via halogen-bonding molecular self-assembly. A bromine-terminated perchlorotriphenylmethyl radical with net carbon spin was synthesized and deposited on Au(111) to achieve two-dimensional supramolecular spin arrays. By taking advantage of the diversity of halogen bonds, five supramolecular spin arrays form and are probed by low-temperature scanning tunneling microscopy at the single-molecule level. First-principles calculations verify that the formation of three distinct types of halogen bonds can be used to tailor supramolecular spin arrays via molecular coverage and annealing temperature. Our work suggests that supramolecular self-assembly can be a promising method to engineer two-dimensional molecular spin arrays.

Recent developments in 2D transition metal dichalcogenides: phase transition and applications of the (quasi-)metallic phases.

The advent of two-dimensional transition metal dichalcogenides (2D-TMDs) has led to an extensive amount of interest amongst scientists and engineers alike and an intensive amount of research has brought about major breakthroughs in the electronic and optical properties of 2D materials. This in turn has generated considerable interest in novel device applications. With the polymorphic structural features of 2D-TMDs, this class of materials can exhibit both semiconducting and metallic (quasi-metallic) properties in their respective phases. This polymorphic property further increases the interest in 2D-TMDs both in fundamental research and for their potential utilization in novel high-performance device applications. In this review, we highlight the unique structural properties of few-layer and monolayer TMDs in the metallic 1T- and quasi-metallic 1T'-phases, and how these phases dictate their electronic and optical properties. An overview of the semiconducting-to-(quasi)-metallic phase transition of 2D-TMD systems will be covered along with a discussion on the phase transition mechanisms. The current development in the applications of (quasi)-metallic 2D-TMDs will be presented ranging from high-performance electronic and optoelectronic devices to energy storage, catalysis, piezoelectric and thermoelectric devices, and topological insulator and neuromorphic computing applications. We conclude our review by highlighting the challenges confronting the utilization of TMD-based systems and projecting the future developmental trends with an outlook of the progress needed to propel this exciting field forward.

Biodegradable and renewable UV-shielding polylactide composites containing hierarchical structured POSS functionalized lignin.

The demand for biodegradable and renewable UV-shielding materials is ever increasing due to the rising concern for the environment. In this paper, biobased lignin was functionalized by polyhedral oligomeric silsesquioxane (POSS) with an epoxy substituent. Then the POSS decorated lignin (lignin-POSS) was mixed with polylactide (PLA) to act as UV-shielding filler by melt compounding. The SEM observation revealed that the presence of POSS contributed to improving the homogeneous dispersion of lignin-POSS in the PLA matrix with good compatibility when the content of lignin-POSS was lower than 5 wt%. The synergistic effects of lignin and POSS endowed PLA composite films with a good balance of UV-shielding ability and transparency in the visible light region. With the addition of 5 wt% lignin-POSS, the PLA composite film absorbed almost all UV irradiation across the entire UV spectrum. In addition, the presence of lignin-POSS could serve as a nucleating agent to increase the degree of crystallinity of PLA. The dynamical rheological tests revealed that the lignin-POSSS reduced the complex viscosity and storage modulus of PLA composites, improving the flowability of PLA composites. This work presents a viable pathway to prepare biodegradable and renewable UV-shielding materials for potential packaging applications.

Impurity-Induced Emission in Re-Doped WS2 Monolayers.

Impurity doping is a viable route toward achieving desired subgap optical response in semiconductors. In strongly excitonic two-dimensional (2D) semiconductors such as transition metal dichalcogenides (TMDs), impurities are expected to result in bound-exciton emission. However, doped TMDs often exhibit a broad Stokes-shifted emission without characteristic features, hampering strategic materials engineering. Here we report observation of a well-defined impurity-induced emission in monolayer WS2 substitutionally doped with rhenium (Re), which is an electron donor. The emission exhibits characteristics of localized states and dominates the spectrum up to 200 K. Gate dependence reveals that neutral impurity centers are responsible for the observed emission. Using GW-Bethe-Salpeter equation (GW-BSE) calculations, we attribute the emission to transitions between spin-split upper Re band and valence band edge.

Incorporation of Ti in epitaxial Fe2TiO4thin films.

The titanomagnetites (Fe2-xTixO4,x⩽ 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4were deposited by molecular beam epitaxy (MBE) on MgO(001) at 250-375 °C. The homogeneous incorporation of Ti, Fe valence state, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the low temperature deposition conditions imposed by use of MgO substrates limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on thermally stable substrates.

Spontaneous phase segregation of Sr2NiO3 and SrNi2O3 during SrNiO3 heteroepitaxy.

Recent discovery of superconductivity in Nd0.8Sr0.2NiO2 motivates the synthesis of other nickelates for providing insights into the origin of high-temperature superconductivity. However, the synthesis of stoichiometric R 1-x Sr x NiO3 thin films over a range of x has proven challenging. Moreover, little is known about the structures and properties of the end member SrNiO3 Here, we show that spontaneous phase segregation occurs while depositing SrNiO3 thin films on perovskite oxide substrates by molecular beam epitaxy. Two coexisting oxygen-deficient Ruddlesden-Popper phases, Sr2NiO3 and SrNi2O3, are formed to balance the stoichiometry and stabilize the energetically preferred Ni2+ cation. Our study sheds light on an unusual oxide thin-film nucleation process driven by the instability in perovskite structured SrNiO3 and the tendency of transition metal cations to form their most stable valence (i.e., Ni2+ in this case). The resulting metastable reduced Ruddlesden-Popper structures offer a testbed for further studying emerging phenomena in nickel-based oxides.

Atomically Dispersed Indium Sites for Selective CO2 Electroreduction to Formic Acid.

An atomically dispersed structure is attractive for electrochemically converting carbon dioxide (CO2) to fuels and feedstock due to its unique properties and activity. Most single-atom electrocatalysts are reported to reduce CO2 to carbon monoxide (CO). Herein, we develop atomically dispersed indium (In) on a nitrogen-doped carbon skeleton (In-N-C) as an efficient catalyst to produce formic acid/formate in aqueous media, reaching a turnover frequency as high as 26771 h-1 at -0.99 V relative to a reversible hydrogen electrode (RHE). Electrochemical measurements show that trace amounts of In loaded on the carbon matrix significantly improve the electrocatalytic behavior for the CO2 reduction reaction, outperforming conventional metallic In catalysts. Further experiments and density functional theory (DFT) calculations reveal that the formation of intermediate *OCHO on isolated In sites plays a pivotal role in the efficiency of the CO2-to-formate process, which has a lower energy barrier than that on metallic In.

Mg2+ Diffusion-Induced Structural and Property Evolution in Epitaxial Fe3O4 Thin Films.

Epitaxial Fe3O4 thin films grown on single crystal MgO(001) present well-defined model systems to study fundamental multivalent ion diffusion and associated phase transition processes in transition-metal-oxide-based cathodes. In this work, we show at an atomic scale the Mg2+ diffusion pathways, kinetics, and reaction products at the Fe3O4/MgO heterostructures under different oxygen partial pressures but with the same thermal annealing conditions. Combining microscopic, optical, and spectroscopic techniques, we demonstrate that an oxygen-rich environment promotes facile Mg2+ incorporation into the Fe2+ sites, leading to the formation of Mg1-xFe2+xO4 spinel structures, where the corresponding portion of the Fe2+ ions are oxidized to Fe3+. Conversely, annealing in vacuum results in the formation of a thin interfacial rocksalt layer (Mg1-yFeyO), which serves as a blocking layer leading to significantly reduced Mg2+ diffusion to the bulk Fe3O4. The observed changes in transport and optical properties as a result of Mg diffusion are interpreted in light of the electronic structures determined by X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. Our results reveal the critical role of available anions in governing cation diffusion in the spinel structures and the need to prevent formation of unwanted reaction intermediates for the promotion of facile cation diffusion.

Phase Diagram and Superconducting Dome of Infinite-Layer Nd_{1-x}Sr_{x}NiO_{2} Thin Films.

Infinite-layer Nd_{1-x}Sr_{x}NiO_{2} thin films with Sr doping level x from 0.08 to 0.3 are synthesized and investigated. We find a superconducting dome x between 0.12 and 0.235 accompanied by a weakly insulating behavior in both under- and overdoped regimes. The dome is akin to that in the electron-doped 214-type and infinite-layer cuprate superconductors. For x≥0.18, the normal state Hall coefficient (R_{H}) changes the sign from negative to positive as the temperature decreases. The temperature of the sign changes decreases monotonically with decreasing x from the overdoped side and approaches the superconducting dome at the midpoint, suggesting a reconstruction of the Fermi surface with the dopant concentration across the dome.

Molecular Beam Epitaxy of Two-Dimensional Vanadium-Molybdenum Diselenide Alloys.

Two-dimensional (2D) alloys represent a versatile platform that extends the properties of atomically thin transition-metal dichalcogenides. Here, using molecular beam epitaxy, we investigate the growth of 2D vanadium-molybdenum diselenide alloys, VxMo1-xSe2, on highly oriented pyrolytic graphite and unveil their structural, chemical, and electronic integrities via measurements by scanning tunneling microscopy/spectroscopy, synchrotron X-ray photoemission, and X-ray absorption spectroscopy (XAS). Essentially, we found a critical value of x = ∼0.44, below which phase separation occurs and above which a homogeneous metallic phase is favored. Another observation is an effective increase in the density of mirror twin boundaries of constituting MoSe2 in the low V concentration regime (x ≤ 0.05). Density functional theory calculations support our experimental results on the thermal stability of 2D VxMo1-xSe2 alloys and suggest an H phase of the homogeneous alloys with alternating parallel V and Mo strips randomly in-plane stacked. Element-specific XAS of the 2D alloys, which clearly indicates quenched atomic multiplets similar to the case of 2H-VSe2, provides strong evidence for the H phase of the 2D alloys. This work provides a comprehensive understanding of the thermal stability, chemical state, and electronic structure of 2D VxMo1-xSe2 alloys, useful for the future design of 2D electronic devices.

Interfacial Oxygen-Driven Charge Localization and Plasmon Excitation in Unconventional Superconductors.

Charge localization is critical to the control of charge dynamics in systems such as perovskite solar cells, organic-, and nanostructure-based photovoltaics. However, the precise control of charge localization via electronic transport or defect engineering is challenging due to the complexity in reaction pathways and environmental factors. Here, charge localization in optimal-doped La1.85 Sr0.15 CuO4 thin-film on SrTiO3 substrate (LSCO/STO) is investigated, and also a high-energy plasmon is observed. Charge localization manifests as a near-infrared mid-gap state in LSCO/STO. This is ascribed to the interfacial hybridization between the Ti3d-orbitals of the substrate and O2p-orbitals of the film. The interfacial effect leads to significant changes in the many-body correlations and local-field effect. The local-field effect results in an inhomogeneous charge distribution, and due to perturbation by an external field, the high polarizability of this nonuniform charge system eventually generates the high-energy plasmon. Transformation of the electronic correlations in LSCO/STO is further demonstrated via temperature-dependent spectral-weight transfer. This study of charge localization in cuprates and interfacial hybridization provides important clues to their electronic structures and superconductive properties.

Anisotropic Collective Charge Excitations in Quasimetallic 2D Transition-Metal Dichalcogenides.

The quasimetallic 1T' phase 2D transition-metal dichalcogenides (TMDs) consist of 1D zigzag metal chains stacked periodically along a single axis. This gives rise to its prominent physical properties which promises the onset of novel physical phenomena and applications. Here, the in-plane electronic correlations are explored, and new mid-infrared plasmon excitations in 1T' phase monolayer WSe2 and MoS2 are observed using optical spectroscopies. Based on an extensive first-principles study which analyzes the charge dynamics across multiple axes of the atomic-layered systems, the collective charge excitations are found to disperse only along the direction perpendicular to the chains. Further analysis reveals that the interchain long-range coupling is responsible for the coherent 1D charge dynamics and the spin-orbit coupling affects the plasmon frequency. Detailed investigation of these charge collective modes in 2D-chained systems offers opportunities for novel device applications and has implications for the underlying mechanism that governs superconductivity in 2D TMD systems.

Enhanced Electrocatalytic Hydrogen Evolution Activity in Single-Atom Pt-Decorated VS2 Nanosheets.

Enhancing catalytic activity by decorating noble metals in catalysts provides an opportunity for promoting the electrocatalytic hydrogen evolution reaction (HER) application. However, there are few systematic studies on regulating the structures of noble metals in catalytic materials and investigating their influence on HER. Herein, Pt catalysts with different structures including single atoms (SAs), clusters, and nanoparticles well-controllably anchored on VS2 nanosheets through a cost-effective optothermal method are reported, and their HER performance is studied. The most efficient Pt-decorated VS2 catalyst (with both Pt SAs and clusters) delivers an overpotential of 77 mV at 10 mA cm-2, close to that of Pt/C (48 mV). However, the optimal mass activity of Pt (normalizing to Pt content) is obtained from only SA Pt-decorated VS2 (i.e., 22.88 A mgPt-1 at 200 mV) and is 12 times greater than that of the Pt/C (1.87 A mgPt-1), attributed to the greatly enhanced Pt utilization. Additionally, the theoretical simulations reveal that Pt SA decoration makes the adsorption free energy of H* closer to the thermoneutral value and improves the charge-transfer kinetics, significantly enhancing HER activity. This work offers a pathway to prepare the desired catalyst based on synergy of Pt structures and VS2 and reveals the intrinsic mechanism for enhancing catalytic activity, which is important for HER applications.

Electronic Modulation in Site-Selective Occupation of Quasi-2D Triangular-Lattice Cs2CuCl4-xBrx Perovskite Probed by Surface-Sensitive Characterization.

A controllable electronic manipulation in a frustrated magnetic system such as solution-based two-dimensional (2D) all-inorganic perovskites offers a possible route for their integrations with electronic and magnetic devices for their advanced applications. Here, we perform element-specific investigations of an emergent class of quasi-2D all-inorganic perovskites Cs2CuCl4-xBrx with (0 ≤ x ≤ 4) using a combination of synchrotron-radiation photoelectron techniques. Surface- and element-sensitive X-ray absorption spectroscopy spectra of Cu L2,3 edges indicate strong electronic transition that is largely influenced by their halogen content at room temperature. This implies that site-selective occupation largely dominates the electronic transition across the unoccupied states of these series since chlorine atoms possess a stronger electronegative character than bromine atoms. Moreover, the implication of halogen site is reflected in the valence band of Cl-rich copper perovskite in which the valence band edge is closer to Fermi energy (EF) than that of the Br-rich compound. Furthermore, X-ray magnetic circular dichroism spectra of mixed ratio and Br-rich compounds exhibit antiferromagnetism at room temperature. These site-specific magnetic-spectroscopic results are corroborated by density functional theory calculations. The strong electronic modulation and the local magnetic spectroscopy results in these solution-based and low-temperature-growth materials will pave the way toward energy- and cost-efficient perovskite devices.